Dishwasher not draining
If your Bosch dishwasher has a pool of water trapped at the bottom of the tub or displays an E24 or E25 error code, the drainage path is blocked.
In most cases, you can resolve this in under 10 minutes without calling a technician.
Most Bosch dishwasher drainage issues are caused by one of three issues:
- A clogged cylindrical filter
- A jammed drain pump impeller
- A kinked drain hose
Safety Warning: Before reaching inside the sump or removing the drain pump cover, always turn off the dishwasher and unplug it from the wall power socket (or switch off the main circuit breaker). Wear protective gloves if checking for broken glass.

1. Blocked dishwasher pump or impeller
If your dishwasher pump is blocked by debris and waste water cannot be pumped out of the appliance. To resolve this issue, please follow the instructions as shown.
1. Take out the bottom basket.
2. Remove the filter unit by carefully twisting the cylindrical top and lift away to access the pump.
3. We recommend using protective gloves when removing the residual water from the pump area. Use a soft sponge to soak up the water and gradually ladle it out of the appliance.
4. When you have removed the water, it is essential that you use protective gloves when placing your fingers in the pump area. This is because broken glass fragments can collect here.
5. Using a tea spoon, prise off the pump cover.
6. Then grip the cover by the lug and pull it upwards until it resists.
7. Then pull forwards. You can check your instruction manual for further information.
8. Check the pump for any foreign objects and remove any deposits.
9. Ensure that the pump impeller can move freely.
10. Replace the pump cover and make sure that it engages correctly back into position until it clicks. The pump covers on some models can be removed by using a manual screwdriver (never use an electric one). Any obstructions should then be removed in the same way.
11. Place the filter back into position, ensuring the arrows align.
12. Replace the basket and your dishwasher is ready for use.
In some cases the impeller can also break. We would then recommend booking an engineer, who will be able to replace the faulty part.
2. Blocked dishwasher filter

If your dishwasher filter is blocked, the obstruction will stop the water from draining effectively, which can lead to food remnants depositing back onto your dishes, as well as drainage problems. To resolve this issue, please follow the instructions as shown.
1. Remove the dishwasher rack.
2. Unlock the filter unit found at the base of the dishwasher and carefully pull it out. Separate the unit by carefully unscrewing the cylindrical filter first.
3. Clean both filters under running tap water. You can use a small brush to gently clean the inside of the filter and remove smaller pieces of debris. Do not use anything abrasive as this can damage the filter.
4. Reassemble the unit and put it back into the dishwasher.
5. Twist the filter to lock it into position until both arrows line up.
3. Check the drain hose & connection
- Inspect the hose: Ensure the corrugated grey drain hose behind the unit or under the sink is not pinched, twisted, or crushed against the wall.
- Check the sink trap: Disconnect the hose clamp at the under-sink spigot to make sure food waste or the internal blanking plug hasn't blocked the outlet.